What are the installation processes and steps of wall panels?

The most complicated part of the installation of the wall hanging panel is when the surface plate (anti magnification special plate) is fixed with the keel. Then the installation process and steps of the whole wall hanging panel will be introduced:

1、 Installation method:

Wall hanging panels are installed in two ways: dry hanging and wet hanging.

Dry hanging type: the keel and surface plate are fixed by screws, corner pieces, adjustable hangers, etc.

Wet hanging type: It is fixed by strong glue between them.

2、 Installation advantages:

Most engineering companies will adopt the dry hanging type, which has the advantages of durability, flatness, deformation resistance, and disassembly. The wet hanging type has the advantages of simple, fast and economical construction, but it is easy to be damaged.

3、 Installation steps:

1. Setting out and measurement: measure the spacing between horizontal and vertical keels, corner code fixing points and other positions according to the instructions of the drawing. Wall panel accessories:

2. Fix the keel. After the measurement, install the vertical keel according to the dimensions in the drawing. Install the horizontal keel on the outside. The horizontal and vertical keels are fixed by corner pieces, buckles and other accessories.

3. Install plates. The installation sequence of plates is from bottom to top, from side to inside, and finally close the window sill. During installation, pay attention to timely insert the insert into the vertical groove, and pay attention to whether the sealing direction is correct.

There are many boards that can be installed, such as calcium silicate board, outdoor multiplayer resistant board and multiplayer resistant board.

Note: What is the MP Special Plate

4. Hanging line inspection: after installing 5-10 rows of plates, use hanging lines or other horizontal measuring instruments to check the flatness and perpendicularity of wall plates, and correct errors in a timely manner.

5. Determine the closing. After the plates are installed, pay attention to the position and size of the closing, and complete the closing through fasteners and other accessories to prevent fire.

6. Check the installation. After the installation, start to check the whole wall panel for looseness, crack, etc. After the problem is checked, it can be cleaned and accepted.

The overall installation steps of wall panels are as follows.

4、 Precautions for installation:

In the process of wall hanging panel installation, there are still many details that need to be noticed, or some doubts, and all of them are proposed to be solved here.

1. How to solve the corner of wall panel?

The corners of wall panels are divided into internal corners and external corners, which are concave and convex. The corresponding panels called "internal corners" and "external corners" will be used here.

2. Will the wallboard scratch the surface?

During installation, the surface plate will generally have a film for dust protection. In addition, railings or other protective measures will be taken during installation to ensure that the wall hanging panel is not damaged during installation. Of course, there are also unavoidable problems. In this case, the installation manufacturer gives compensation, so don't worry.

Yuantu is a fireproof board manufacturer and a supporting company for the surrounding equipment of fireproof boards. It is mainly engaged in fireproof boards, UV high gloss boards, UV high gloss boards, fireproof boards, wall hanging boards, and fingerprint resistant boards. If you want to select fireproof boards and fireproof boards, you are welcome to consult!