What is the fireproof board?

Because of its natural advantages, fireproof boards have sprung up in China. In China, the main production places of fireproof boards are concentrated in Henan, Changzhou, Shandong and other places. When installing the plate, the material must meet the room temperature standard and maintain a stable temperature. The material shall not be installed at a place with a temperature very different from the normal use place.

The fire-resistant plate decorative plate and ceiling belong to indoor decoration products. They are designed for installation in the normal use space at 15 ℃ - 30 ℃, and the relative humidity shall not exceed 70%. All gypsum, cement, grinding stone or other wet works must be properly placed. Before, during or after installation, the heating, ventilation and cold air conditioning systems must be installed and ready for use to maintain normal temperature.

It is recommended not to cover the ceiling with insulation materials or support the insulation materials with the ceiling. Under the condition of high relative humidity, if the ceiling bears additional weight, it may cause the ceiling to sink. If such insulation materials are required for the project, they must be used in the normal use environment (temperature: 15 ℃ - 30 ℃, relative humidity: 70%), and the weight of the insulation materials shall not exceed 1.269kg/m2. Only the rolled insulation materials can be used. And it must be installed vertically in the support point of the skeleton to support the weight of the insulation material.

The maintenance of the fireproof board is similar to that of the general painted ceiling. However, when maintenance is required, in order to ensure the high performance, effect and beauty of the ceiling, please handle it according to the specified methods. The dust or loose soil shall be cleaned with a brush or a vacuum cleaner. The accessories of the vacuum cleaner shall be of the type of curtain cloth or wall surface, and must be cleaned in one direction to prevent the dust from rubbing into the ceiling surface again. After the dust is cleaned, such as lead wool marks, dirty spots, or attached dirt can be wiped off with general art glue. For example, if high-quality wall cleaner is used to wipe, the water in the sponge should be squeezed dry as much as possible. After wiping, the thin touch of the cleaner can be cleaned with a rag or a little wet sponge with water.

Yuantu is a fire plate manufacturer and fire plate peripheral equipment supporting company, mainly engaged in fire-resistant plate, UV high light plate, UV high light plate, fire-resistant plate, wall hanging plate and anti fingerprint plate. If you want to select fire-resistant plate and fire-resistant plate, you are welcome to consult!