You must make a cupboard with fireproof board. The fireproof board is made of base paper (titanium powder paper and kraft paper) through melamine and phenolic resin impregnation process and high temperature and high pressure environment:

1. Mineral wool board and glass wool board: mineral wool and glass wool are mainly used as thermal insulation materials. Therefore, most plates have evolved into plates with inorganic bonding materials as substrates and mineral wool and glass wool as reinforcing materials.

2. Cement board: cement board has high strength and wide sources. In the past, it was often used as fireproof ceiling and partition wall, but its fire resistance was poor. It was easy to burst and perforation at the fire site, lost its protection function, and its application was limited. Cement concrete components have good heat and sound insulation performance and can be used as partition walls and roof panels. 3. Perlite board, floating bead board and vermiculite board: hollow board made of low alkalinity cement as base material, perlite, glass beads and vermiculite as aerated filling materials, and then some additives.

It has the characteristics of light weight, high strength, good toughness, fire prevention and heat insulation, convenient construction and so on. It can be widely used in non load-bearing parts of high-rise frame buildings such as compartments, residents, toilets, kitchens, communication pipes and so on.

4. Fireproof gypsum board: since the fireproof performance of gypsum has been widely accepted, gypsum based fireproof board has developed rapidly. The main component of the plate is nonflammability, containing crystalline water and good fire resistance. It can be used as partition wall, ceiling and roof panel. The raw materials of plate are rich, which is convenient for factory production.

There are many factors affecting the fire resistance of gypsum board, such as composition, board type, keel type, board thickness, whether there is filler in the air layer, assembly method, etc.

characteristic:

1. Thermal insulation: its thermal insulation performance is 6 times that of glass, 3 times that of clay and 10 times that of ordinary concrete;

2. Light weight and high strength: 1 / 4 of ordinary concrete and 1 / 3 of clay brick, lighter than water and equivalent to wood; Cube compressive strength 4MPa. Especially in steel structure engineering, using ALC plate as enclosure structure can give full play to its advantages of light weight, high strength, good ductility and strong seismic capacity.

3. Fire resistance and flame retardancy: aerated concrete is an inorganic substance that will not burn and produce harmful gases at high temperature; At the same time, the thermal conductivity of aerated concrete is very small, which makes the heat transfer slow, which can effectively resist fire and protect its structure from fire.

4. Convenient processing: it can be sawed, drilled, ground and nailed, which is easier to reflect the design intention;

5. Sound absorption and sound insulation: different thickness can reduce the noise by 30 ~ 50 dB; The internal composition material of light strip series (EPS polystyrene particles) has good sound insulation and absorption functions.

Yuantu is a fireproof board manufacturer and supporting company of fireproof board peripheral equipment, mainly engaged in fireproof board, UV high gloss board, UV high gloss board, fireproof board, wall board and anti fingerprint board. If you want to choose fireproof board and fireproof board, you are welcome to consult!